Monitor Stand
July 2nd to 5th

Click image for enlargement.
Mitered corners, and all, it's glue up time.
(Never too many clamps)

(02:07:2019)

Sand out the glue.

(05:07:2019)
Just look at those corners! This is a face frame added to pretty up the look.

(05:07:2019)
After a couple coats of polyurethane it's now in place.

On the right hand side of the shelf is a Raspberry Pi - 3a.

(05:07:2019)
The system.

(05:07:2019)
This is why the stand was made. It was very disconcerting to have these three monitors at different viewing level when you're working back and forth between them.

(05:07:2019)
Click the Home button below to return to the main button menu.